Custom Face Shields
These custom face shields provide you with two products in one: a bucket with visor. The bucket hat is reversible and made from denim, oilcloth, or canvas fabric. The detachable plastic visor keeps you protected from grime and dirt. The visor is made from clear plastic and finished with a choice of cream or black binding around the edge. It is attached to the hat with press studs placed at intervals under the hat brim. The visor can only be attached to one side of the hat, with the back of the press studs visible on the inside reverse of the hat (see images). When not in use, it can be rolled up and stored away. The custom printed face shields are available in several sizes for children and adults.
Design your own face shield inside and out; the bucket hat is reversible so you can switch up your style from day to day.
Measuring Size For Face Shield: Find Your Visor Hat Size
Our face shields are made using your hat size:
- Measure around your head from the ear and back round. Use this to find the correct size on our size chart
- Your visor will come in one of two sizes, depending on your hat size: S-2XL visors will be 18.9" x 7.9". XS visors will be 15.0" x 7.5".
- Refer to our size chart. If your measurements are close to the size boundary, please order one size up
Please note: Custom face shields are NOT medical grade. So please DO NOT purchase this custom face shield with the false understanding they will prevent infection from Coronavirus.
Bucket Hat or Face Shield
When designing your custom printed face shield, be sure to add your main designs to the top side of your bucket hat. That way, you can use this design as both a hat or face shield. Your second design, on the inside of the visor hat, can only be used as a hat rather than a face shield: The visor is attached at press studs around the perimeter of the hat, therefore the reverse design will feature the back of the press studs and these will be visible.
Wash at 86°F, low tumble dry heat, hang to dry, do not wring, low heat iron.
Frequently asked questions:
How do I look after my custom face shields?
Please clean your custom printed face shields regularly. Aim to wipe down the visor with alcohol or warm soapy water after every use. The bucket hat can be machine washed at 86 degrees.
What can I use my face shield for?
As this custom face shield is a bucket hat with visor combination; there are many uses for it! You can use the shield to cover your face and protect you from grime, dirt, or bad weather. When not at work, you can remove the visor and simply use your hat to protect your head from the sunshine.
How do I know which size face shield to order?
To find the right size for you, we take your hat measurements. Measure around your head from the ear to get the best size fit. Depending on the size you select, you will receive a 18.9" x 7.9" visor, or a 15.0" x 7.5" visor. Refer to our size chart to see where your measurements fit into the sizes. If your measurements are close to the size boundary, please order one size up.
What's the best resolution to print in?
We print at 200dpi, which is a good combination of quality and file weight. Ideally, your image should be scaled to 100% at 200dpi; this means that no resizing of your file occurs, preventing any interpolation. Our design interface will have a quality marker next to the design that you have uploaded, this will change color using a traffic light system and display a message. The message will let you know if the resolution is too low or if you have a good quality image.
How will my image scale?
When you upload your design our system will automatically scale it to fit your chosen fabric dimensions. In the ‘Product Image’ tab, the displayed dimensions under ‘Print Size’ will show the dimensions of the piece of fabric that you are ordering. For image/design dimensions you need to see the ‘Images & Text Tools’ tab. You can see and edit the dimensions of the image under the quality information next to the thumbnail.
Which color model should I choose? RGB or CMYK?
We advise providing images in the RGB color space. Specifically using the sRGB image profile, to achieve best color results. What does this mean? In your editing software, choose RGB as the working space and assign the image profile as sRGB (full name sRGB IEC61966-2.1)
For most of our fabrics there is no limit on the length of the fabric that you can order. We have a preview design window set up to 10 yds max to visualize the print, but that's not a print limit. If you'd like to order more, increase the quantity (x2 for 20 yds or x4 for 40 yds for e.g.) and then you can order as much as you'd like, with a built in automatic volume discount too. The maximum print width of each fabric can be found on the individual fabric pages or in our design interface.
Do I need to incorporate white space within my design if I want a border or some cutting space?
Yes, that might help you! Always incorporate any extra space or borders into your purchased fabric size. We trim squarely around fabric samples and fabric prints, leaving approximately 0.2" white space. Cutting neatly on the line has an additional fee.
What is crocking and why might it occur?
Crocking, which is fading along the creases, often after washing or heavy use, occurs when you digitally print on natural fabrics - more so when dark or dense colors are used. It can be minimized by using a cool hand wash instead of machine washing as the tumbling of the machine is the main cause of this. To avoid entirely, we would advise using a poly fabric.
Why do the colors appear lighter on organic fabrics?
Our organic fabrics do not have any coatings that the non-organic fabrics have. This means the ink absorbs into the fibers, reducing the color strength slightly (by approx. -40%). For super strong colors we recommend a non-organic natural fabric.
Do you print on fabric a customer supplies?
Unfortunately not; we like to test meticulously so that we know what gets the best results on our fabrics, and our facilities cater perfectly to them. We do however print sublimation transfer paper to order, and if you have access to a heat press you can press your own fabrics easily.
Should I save my file as a TIFF or JPEG?
For multi-coloured or very detailed files we recommend using a tiff format, but they must be flattened. For simple colors and low detail files, a jpeg is fine.
What is the situation with material shrinkage?
Just like many fabric printing processes, there is the potential for shrinkage. Depending on the fabric, please expect and allow between 2-8% shrinkage which you need to plan for in your dimensions. This percentage can vary from print run to print run and between fabrics, so we would advise to order a little more material than you require for your project.
Can I print on both sides of the fabric?
We do not offer printing on both sides of the fabric, as a lot of our fabrics are semi-transparent. As the customer, you can consider the effect of printing on both sides one of our fabrics and contact us, and we will get back to you if it's feasible.
Can I order labels in another fabric? Will you cut them like you do with the normal fabric labels?
At the moment no, our labels are all printed on the same satin fabric. We may introduce more in the future, but for now, this is the best choice. The labels are all cut the same way. You can order the fabric of your choice and make the labels yourself, but we do not cut different fabric into label format.
How is your fabric printing eco-friendly?
With environmental consciousness in mind, our fabrics are all printed using completely water-based inks. This means no chemicals or solvents are used. Our heat fixing procedure fixes the colors and prints, avoiding the downsides of steaming, such as excess or contaminated water returning into the waste system. We have one facility where we conduct all the printing, production and fulfillment.
Why are there slight color differences between my orders?
We work at improving our color profiles all the time. Though rare, it may happen that from one print run to another, and there could be slight color differences, this is normal and part of the process when we are constantly improving. It is extremely unlikely that there will be a huge difference (like orange instead of red for example). Please bear in mind such color variations can be intensified from fabric to fabric due to the varying grains and textures of the fabric. This is due to the construction of the materials as well as the print methods that have to be altered slightly for more delicate, natural textiles.
Sizing For Hemming And Shrinkage
We have a full Cut & Sew service here at Contrado, and are able to hem your fabric prints for a small additional charge. We create a small one- or two-fold hem that typically uses 0.2" to 0.75" (5-20mm) of material, depending on the thickness of the fabric. So, for example, if you want a finished piece of fabric that measures 39.37" x 39.37", you will need to order a size of 39.96" x 39.96" to allow for the hem (on top of that please also allow for shrinkage of min 2%). The thicker the fabric, the bigger the hem will be. You can choose to have your prints hemmed with either Black or White thread. On our silk and other light woven fabrics, one hemmed edge will be straight (vertically down the roll) and the other will be slightly rippled. The hemming material allowances are as follows and you need to make your print bigger to accommodate the hem:
- Light Fabrics (0.59oz-2.95oz): For silks and other light fabrics, we use 0.24" - 0.32" / 6mm-8mm in the hem (2 fold), so overall width/height will be minus 0.48"-0.56""/ 12-16mm
- Medium Fabrics (2.98oz-5.90oz): For medium-weight fabrics that fray, we use 0.5 - 0.75" / 15-20mm in the hem (2 fold) so overall width/height will be minus 1.4" - 1.6" / 35-40mm
- Stiff/Heavy/No-fray fabrics: we use 0.5 - 0.75" / 15-20mm in the hem (1 fold) so overall width/height will be minus 1.5" / 35-40mm
All of these measurements are approximate and can vary. Including with shrinkage, it can mean a fairly significant difference to ordered dimensions, so please plan your print accordingly. Depending on how open the weave is, our fabric can shrink anywhere from 2% to 8% with the average being 2.5%.
How Would you Like the Edge?
We have four finishing options for your fabric order:
- As it comes. We cut around your image, leaving a simply scissor cut, perhaps uneven white fabric border.
- Hem with thread. We can hem your fabric with a choice of black or white thread. Please allow 1-2 days additional production time. See below for information on how hemming affects the size of your print. We offer an overlock hem, as well as a folded hem (one or two fold depending on the fabric) however not all fabrics are suited to both hem types. If you can see both options, it means both are suitable, and you will be able to choose whichever you prefer.
- Cut on the line. We will cut neatly on the edge of your design. This means that if you have a border around your design we will cut around that border, if your design takes the whole space of the fabric, then we will neatly cut around the edge of that image. Please be aware, when we cut along the line, we have to cut against the grain of the fabric. This is the standard procedure for fabric cutting. This means that with some fabrics, for example, Georgette and Mulmul, which have a slight wave in them, some fraying will occur. This is unavoidable, as the cut follows the grain of the textile.
All of our fabrics are cut manually by hand, with the utmost care and attention. If your fabric has a slightly uneven look on the edges or a touch of fraying, this does not indicate a flaw in the textile. It is not always possible to achieve a perfectly straight cut with certain fabrics, so please do bare this in mind when it comes to your design. If you have any queries or would like to know about our cutting methods in more detail, please get in touch and we will be more than happy to discuss them with you.
Please note: As we make everything by hand, all sizes may vary slightly.
For further information about our fabrics see our FAQs.