Cotton Satin (+2 days) 5.1 oz $20
Ready in 1 - 2 day(s).
- Cotton Satin (+2 days) 5.1 oz
- Max Width: 1.51yd
- Weight: 5.07oz
- Roll Width: 1.53yd
- Find it in our Swatch pack
Wash at 30°c
Custom Cotton Satin fabric
If you were struggling to find digital Cotton Satin printing, look no further. Our Cotton Satin is perfect for pristine prints, so go ahead and have a look at our new and improved 100% natural cotton.
Our custom made Cotton Satin fabric is closely woven and firm to the touch. Since it has not been treated by any harsh chemicals, it retains the natural wax that can be found in all natural cottons. This provides a smoothness and hang that drapes easily to reflect and absorb light.
With over 10 years of experience, our in-house production experts take great care and pay careful attention to detail while printing your designs. The combination of the crisp white base and our use of water-based inks allow for beautiful, vibrant colored prints and precise detail at a minimum resolution of 150 dpi. The sharp imagery sits perfectly in the fabric. Printed with water based inks with low carbon footprint.
The quality of this fabric makes it perfectly adaptable to a host of uses, ranging from cotton tote bags to napkins. It is perfect for interiors such as cushions, curtains and furnishings. The desire for natural cottons within fashion is on the rise, so this fabric is fitting for any of your designer needs.
Reviews of Cotton Satin Printing
based on 3 customer reviews
The website was easy to use, the order arrived quickly, the fabric was printed exactly as I expected, and it made beautiful skirts for our upcoming vacation!
Printing was great, fabric hand is quality. Customer service very helpful.
NO ONE can beat the service, quality, and ease of use that Contrado brings to the table! Period.
Frequently asked questions on Cotton Satin (+2 days) 5.1 oz :
What Is the Difference Between the Cotton Satin and the Lima Twill?
They are both great quality fabrics, but the Lima Twill comes with a classic distinctive twill weave and a slightly softer face. The Lima is also heavier by 0.83oz. For more properties on each, read the Lima Twill info, or order a swatch pack for all the samples and compare till your heart's content.
Is This Suitable for Interior Upholstery?
You may want to compare our range of cottons available, as this is right in the middle of our category. You may be looking for something with a firmer surface, more texture, or something a little heavier. We would happily use it for interior accessories, and it is also perfect for clothes.
Is It Possible to Get a Small Sample or Test Print Delivered by express Delivery?
We always add two days for production on this fabric as it is a completely natural cotton and the process takes a little longer. We recommend giving yourself a few days leeway on either side of your order, and if you're really worried give customer services a ring and they will give you accurate estimates on delivery.
You have the amazing designs, but do you have a unique range and place to sell?
All you have to do is design what you love and we bring your creations to life. We take care of the hand crafting and manufacture, the sales and the shipping. You the designer, control the products and designs from wherever you are, from home, the office, even on the go. Meanwhile the orders start to roll in and you get commissions fast.
What's the best resolution to print in?
We print at 200dpi, which is a good combination of quality and file weight. Ideally, your image should be scaled to 100% at 200dpi; this means that no resizing of your file occurs, preventing any interpolation. Our design interface will have a quality marker next to the design that you have uploaded, this will change color using a traffic light system and display a message. The message will let you know if the resolution is too low or if you have a good quality image.
How will my image scale?
When you upload your design our system will automatically scale it to fit your chosen fabric dimensions. In the ‘Product Image’ tab, the displayed dimensions under ‘Print Size’ will show the dimensions of the piece of fabric that you are ordering. For image/design dimensions you need to see the ‘Images & Text Tools’ tab. You can see and edit the dimensions of the image under the quality information next to the thumbnail.
Which color model should I choose? RGB or CMYK?
If each individual color is specifically important to your design, choose CYMK as our setup will print each color with the closest possible match within our available range. If the relationship between the colors within the image is more important choose RGB; this will reduce all colors equally to fit within our range.
For most of our fabrics there is no limit on the length of the fabric that you can order. We have a preview design window set up to 10 yds max to visualize the print, but that's not a print limit. If you'd like to order more, increase the quantity (x2 for 20 yds or x4 for 40 yds for e.g.) and then you can order as much as you'd like, with a built in automatic volume discount too. The maximum print width of each fabric can be found on the individual fabric pages or in our design interface.
Do I need to incorporate white space within my design if I want a border or some cutting space?
Yes, that might help you Always incorporate any extra space or borders into your purchased fabric size. We trim squarely around fabric samples and fabric prints, leaving approximately 0.22" white space. Cutting neatly on the line has an additional fee.
Do you print on fabric a customer supplies?
Unfortunately not; we like to test meticulously so that we know what gets the best results on our fabrics, and our facilities cater perfectly to them. We do however print sublimation transfer paper to order, and if you have access to a heat press you can press your own fabrics easily.
Should I save my file as a TIFF or JPEG?
For multi-coloured or very detailed files we recommend using a tiff format, but they must be flattened. For simple colors and low detail files, a jpeg is fine.
What is the situation with material shrinkage?
Just like many fabric printing processes, there is the potential for shrinkage. Depending on the fabric, please expect and allow between 2-8% shrinkage which you need to plan for in your dimensions.
This percentage can vary from print run to print run and between fabrics, so we would advise to order a little more material than you require for your project.
Can I print on both sides of the fabric?
We do not offer printing on both sides of the fabric, as a lot of our fabrics are semi-transparent. As the customer, you can consider the effect of printing on both sides one of our fabrics and contact us, and we will get back to you if it's feasible.
Can I order labels in another fabric? Will you cut them like you do with the normal fabric labels?
At the moment no, our labels are all printed on the same satin fabric. We may introduce more in the future, but for now, this is the best choice. The labels are all cut the same way. You can order the fabric of your choice and make the labels yourself, but we do not cut different fabric into label format.
How is your fabric printing eco-friendly?
With environmental consciousness in mind, our fabrics are all printed using completely water-based inks. This means no chemicals or solvents are used. Our heat fixing procedure fixes the colors and prints, avoiding the downsides of steaming, such as excess or contaminated water returning into the waste system. We have one facility where we conduct all the printing, production and fulfillment.
Sizing For Hemming And Shrinkage
We have a full Cut & Sew service here at Contrado, and are able to hem your fabric prints for a small additional charge. We create a small one- or two-fold hem that typically uses 0.22" to 0.75" (5-20mm) of material, depending on the thickness of the fabric. So, for example, if you want a finished piece of fabric that measures 39.37" x 39.37", you will need to order a size of 39.96" x 39.96" to allow for the hem (on top of that please also allow for shrinkage of min 2%). The thicker the fabric, the bigger the hem will be. You can choose to have your prints hemmed with either Black or White thread. On our silk and other light woven fabrics, one hemmed edge will be straight (vertically down the roll) and the other will be slightly rippled. The hemming material allowances are as follows and you need to make your print bigger to accommodate the hem:
- Light Fabrics (0.59oz-2.95oz): For silks and other light fabrics, we use 0.24" - 0.32" / 6mm-8mm in the hem (2 fold), so overall width/height will be minus 0.48"-0.56""/ 12-16mm
- Medium Fabrics (2.98oz-5.90oz): For medium-weight fabrics that fray, we use 0.5 - 0.75" / 15-20mm in the hem (2 fold) so overall width/height will be minus 1.4" - 1.6" / 35-40mm
- Stiff/Heavy/No-fray fabrics: we use 0.5 - 0.75" / 15-20mm in the hem (1 fold) so overall width/height will be minus 1.5" / 35-40mm
All of these measurements are approximate and can vary. Including with shrinkage, it can mean a fairly significant difference to ordered dimensions, so please plan your print accordingly. Depending on how open the weave is, our fabric can shrink anywhere from 2% to 8% with the average being 2.5%.
How Would you Like the Edge?
We have four finishing options for your fabric order:
- As it comes. We cut around your image, leaving a simply scissor cut, perhaps uneven white fabric border.
- Hem with thread. We can hem your fabric with a choice of black or white thread. Please allow 1-2 days additional production time. See below for information on how hemming affects the size of your print. We offer an overlock hem, as well as a folded hem (one or two fold depending on the fabric) however not all fabrics, are suited to both hem types. If you can see both options, it means both are suitable, and you will be able to choose whichever you prefer.
- Cut on the line. We will cut neatly on the edge of your design. This means that if you have a border around your design we will cut around that border, if your design takes the whole space of the fabric, then we will neatly cut around the edge of that image. Please be aware, when we cut along the line, we have to cut against the grain of the fabric. This is the standard procedure for fabric cutting. This means that with some fabrics, for example, Georgette and Mulmul, which have a slight wave in them, some fraying will occur. This is unavoidable, as the cut follows the grain of the textile.
All of our fabrics are cut manually by hand, with the utmost care and attention. If your fabric has a slightly uneven look on the edges or a touch of fraying, this does not indicate a flaw in the textile. It is not always possible to achieve a perfectly straight cut with certain fabrics, so please do bare this in mind when it comes to your design. If you have any queries or would like to know about our cutting methods in more detail, please get in touch and we will be more than happy to discuss them with you.
Please note: As we make everything by hand, all sizes may vary slightly.
For further information about our fabrics see our FAQs.