Velvet Shimmer 10.9 oz
Ready To Ship In 1 - 2 Day(s).
- Velvet Shimmer 10.9 oz
- Max Width: 1.53yd
- Weight: 10.94oz
- Roll Width: 1.55yd
- Find it in our Swatch pack
The most pampered of our fabric ranges, there’s a trick to keeping these needy girls and boys at their fluffiest and most gorgeous, and the secret lies in a stiff brush. Every few washes if you feel the fibers stiffening at all, wait until the fabric is dry then give it a loving brush until you feel it relax and return to its pampered self.
Printing Velvet Shimmer Fabric
There is a gorgeous smooth velvety feel to the surface of the custom printed Velvet Shimmer fabric, you need to stroke it to get the full affect of the magnificent handle.
The front texture is centered around the short dense pile of the face, it’s very soft, hands slide over it smoothly without resistance. The back texture is very different to the front, still soft but a lot coarser without the pile. The feel on the body, the velvet face is very desirable, its tactile quality is very pleasing to the skin. Regarding draping, it’s quite a strong stiff fabric, with a tight weave it’s got a good structure which holds shapes well and returns to its shape easily.
With the shiny shimmery finish to the face, images look more impressive with the sheen. The base color of fabric is an off white, moving into the shades of cream. It's possible that the pile will be pressed into different directions during the print process, resulting in a varied color and shine finish depending on where the light falls. The bright high contrast colors made slightly subtler by the off white base of the print. Its shiny surface reflects light well and catches the eye when either stationary or moving.
With a great recovery, this fabric is highly suitable for use in cushions, upholstery, bags and many more homeware and accessory options. Great results during Abrasion testing, rated 1-5, 5 being best. Velvet Shimmer achieved grade 4-5 across all colors, wet and dry, with slight shade change after 3,000 rubs - Grade 4. Certified for any end use within furnishings upholstery - certificates available on request.
Frequently asked questions on Velvet Shimmer 10.9 oz :
What is the difference between the 'Velvet Shimmer' and the 'Plush Velvet'?
The Velvet Shimmer has a reinforced woven back which makes it stronger. Whereas the long pile Plush Velvet has a stretchy quality which it wouldn't have with the structured back. The surface qualities are completely different too, you may want to feel them for yourself by ordering a swatch pack and feeling the samples.
Will the prints have bold colors?
The colors are very bold, but the base of the fabric is a shade of cream so it has a subtler effect than that of some of the crisp white fabrics. If you are looking for a fabric with a similar shine but sharper colors, maybe try the Crush Velour.
What would you recommend this is used for in the home?`
There are so many uses for this, it's perfect for upholstery and accessories such as cushions, it's smooth surface with the velvety sheen give it an elegant finish that can give any room a tasteful finish.
Browse Designer Velvet Shimmer
Explore a selection of glorious prints for velvet shimmer fabric. Designed by Contrado Creatives.
You have the amazing designs, but do you have a unique range and place to sell?
All you have to do is design what you love and we bring your creations to life. We take care of the hand crafting and manufacture, the sales and the shipping. You the designer, control the products and designs from wherever you are, from home, the office, even on the go. Meanwhile the orders start to roll in and you get commissions fast.
What's the best resolution to print in?
We print at 200dpi, which is a good combination of quality and file weight. Ideally, your image should be scaled to 100% at 200dpi; this means that no resizing of your file occurs, preventing any interpolation. Our design interface will have a quality marker next to the design that you have uploaded, this will change color using a traffic light system and display a message. The message will let you know if the resolution is too low or if you have a good quality image.
How will my image scale?
When you upload your design our system will automatically scale it to fit your chosen fabric dimensions. In the ‘Product Image’ tab, the displayed dimensions under ‘Print Size’ will show the dimensions of the piece of fabric that you are ordering. For image/design dimensions you need to see the ‘Images & Text Tools’ tab. You can see and edit the dimensions of the image under the quality information next to the thumbnail.
Which color model should I choose? RGB or CMYK?
We advise providing images in the RGB color space. Specifically using the sRGB image profile, to achieve best color results. What does this mean? In your editing software, choose RGB as the working space and assign the image profile as sRGB (full name sRGB IEC61966-2.1)
For most of our fabrics, there is no limit on the length of the fabric that you can order. We have a preview design window set up to 10 yds max to visualize the print, but that's not a print limit. If you'd like to order more, increase the quantity (x2 for 20 yds or x4 for 40 yds for e.g.) and then you can order as much as you'd like, with a built in automatic volume discount too. The maximum print width of each fabric can be found on the individual fabric pages or in our design interface.
Do I need to incorporate white space within my design if I want a border or some cutting space?
Yes, that might help you! Always incorporate any extra space or borders into your purchased fabric size. We trim squarely around fabric samples and fabric prints, leaving approximately 0.2" white space. Cutting neatly on the line has an additional fee.
What is crocking and why might it occur?
Crocking, which is fading along the creases, often after washing or heavy use, occurs when you digitally print on natural fabrics - more so when dark or dense colors are used. It can be minimized by using a cool hand wash instead of machine washing as the tumbling of the machine is the main cause of this. To avoid entirely, we would advise using a poly fabric.
Why do the colors appear lighter on organic fabrics?
Our organic fabrics do not have any coatings that the non-organic fabrics have. This means the ink absorbs into the fibers, reducing the color strength slightly (by approx. -40%). For super strong colors we recommend a non-organic natural fabric.
Do you print on fabric a customer supplies?
Unfortunately not; we like to test meticulously so that we know what gets the best results on our fabrics, and our facilities cater perfectly to them. We do however print sublimation transfer paper to order, and if you have access to a heat press you can press your own fabrics easily.
Should I save my file as a TIFF or JPEG?
For multi-colored or very detailed files we recommend using a tiff format, but they must be flattened. For simple colors and low detail files, a jpeg is fine.
What is the situation with material shrinkage?
Just like many fabric printing processes, there is the potential for shrinkage. Depending on the fabric, please expect and allow between 2-8% shrinkage which you need to plan for in your dimensions. This percentage can vary from print run to print run and between fabrics, so we would advise to order a little more material than you require for your project.
Can I print on both sides of the fabric?
We do not offer to print on both sides of the fabric, as a lot of our fabrics are semi-transparent or have some show through. This wouldn't work with double-sided printing. This is not a service that we offer on any of our fabrics.
Can I order labels in another fabric? Will you cut them like you do with the normal fabric labels?
At the moment no, our labels are all printed on the same satin fabric. We may introduce more in the future, but for now, this is the best choice. The labels are all cut the same way. You can order the fabric of your choice and make the labels yourself, but we do not cut different fabric into label format.
How is your fabric printing eco-friendly?
With environmental consciousness in mind, our fabrics are all printed using completely water-based inks. This means no chemicals or solvents are used. Our heat fixing procedure fixes the colors and prints, avoiding the downsides of steaming, such as excess or contaminated water returning into the waste system. We have one facility where we conduct all the printing, production and fulfillment. Rather than roll the fabrics, or send them in a tube, we fold them before they are sent out to you. This saves over 150 tubes a week, as well as a lot of space on the delivery van. (For delicate fabrics we ensure to package appropriately).
Why are there slight color differences between my orders?
We work at improving our color profiles all the time. Though rare, it may happen that from one print run to another, and there could be slight color differences, this is normal and part of the process when we are constantly improving. It is extremely unlikely that there will be a huge difference (like orange instead of red for example). Please bear in mind such color variations can be intensified from fabric to fabric due to the varying grains and textures of the fabric. This is due to the construction of the materials as well as the print methods that have to be altered slightly for more delicate, natural textiles.
Sizing For Hemming And Shrinkage
We have a full Cut & Sew service here at Contrado, and are able to hem your fabric prints for a small additional charge. We create a small one- or two-fold hem that typically uses 0.2" to 0.75" (5-20mm) of material, depending on the thickness of the fabric. So, for example, if you want a finished piece of fabric that measures 39.37" x 39.37", you will need to order a size of 39.96" x 39.96" to allow for the hem (on top of that please also allow for shrinkage of min 2%). The thicker the fabric, the bigger the hem will be. You can choose to have your prints hemmed with either Black or White thread. On our silk and other light woven fabrics, one hemmed edge will be straight (vertically down the roll) and the other will be slightly rippled. The hemming material allowances are as follows and you need to make your print bigger to accommodate the hem:
- Light Fabrics (0.59oz-2.95oz): For silks and other light fabrics, we use 0.24" - 0.32" / 6mm-8mm in the hem (2 fold), so overall width/height will be minus 0.48"-0.56""/ 12-16mm
- Medium Fabrics (2.98oz-5.90oz): For medium-weight fabrics that fray, we use 0.5 - 0.75" / 15-20mm in the hem (2 fold) so overall width/height will be minus 1.4" - 1.6" / 35-40mm
- Stiff/Heavy/No-fray fabrics: we use 0.5 - 0.75" / 15-20mm in the hem (1 fold) so overall width/height will be minus 1.5" / 35-40mm
All of these measurements are approximate and can vary. Including with shrinkage, it can mean a fairly significant difference to ordered dimensions, so please plan your print accordingly. Depending on how open the weave is, our fabric can shrink anywhere from 2% to 8% with the average being 2.5%.
How Would you Like the Edge?
We have four finishing options for your fabric order:
- As it comes. We cut around your image, leaving a simply scissor cut, perhaps uneven white fabric border.
- Hem with thread. We can hem your fabric with a choice of black or white thread. Please allow 1-2 days additional production time. See below for information on how hemming affects the size of your print. We offer an overlock hem, as well as a folded hem (one or two fold depending on the fabric) however not all fabrics are suited to both hem types. If you can see both options, it means both are suitable, and you will be able to choose whichever you prefer.
- Cut on the line. We will cut neatly on the edge of your design. This means that if you have a border around your design we will cut around that border, if your design takes the whole space of the fabric, then we will neatly cut around the edge of that image. Please be aware, when we cut along the line, we have to cut against the grain of the fabric. This is the standard procedure for fabric cutting. This means that with some fabrics, for example, Georgette and Mulmul, which have a slight wave in them, some fraying will occur. This is unavoidable, as the cut follows the grain of the textile.
All of our fabrics are cut manually by hand, with the utmost care and attention. If your fabric has a slightly uneven look on the edges or a touch of fraying, this does not indicate a flaw in the textile. It is not always possible to achieve a perfectly straight cut with certain fabrics, so please do bare this in mind when it comes to your design. If you have any queries or would like to know about our cutting methods in more detail, please get in touch and we will be more than happy to discuss them with you.
Please note: As we make everything by hand, all sizes may vary slightly.
For further information about our fabrics see our FAQs.